Almost-Ready-to-Fly · Commercial Line
A 500 mm quadcopter platform for autonomy development, with telemetry and optical-flow sensing. Flight controller, companion computer, mission sensors and battery are chosen by the integrator.
This kit is not NDAA Section 848 compliant and is not eligible for federal procurement. No country-of-origin or NDAA declarations are supplied. Intended for commercial, research, and educational use without sourcing restrictions.

Airframe
- Configuration
- Quad · X-frame
- Wheelbase
- 500 mm
- Frame Weight
- 920 g
- Base Airframe
- 1578 g
- MTOW
- 4000 g
- Payload Headroom
- 1232 g
Powertrain
- Motor
- EMAX ECO II 3115 · 640 KV
- ESC
- HGLRC 60 A 4-in-1 BLHeli_S
- Propeller
- Master Airscrew MR 10×4.5
- Thrust Margin
- 3.47:1 at reference weight (11×4.5 basis)
- Hover Throttle
- ~30%
- Power Path
- XT90 to 4-in-1 ESC
Avionics
- Telemetry
- MicoAir LR900-F · 500 mW LoRa · 915 MHz
- Optical Flow
- MicoAir MTF-01P · flow + laser ToF
- Autopilot Interface
- Standard Pixhawk
- Firmware
- ArduPilot · PX4
Battery & Endurance
- Battery
- 6S 5000 mAh LiPo (not included)
- Endurance, reference
- 13.7 min (11×4.5 basis)
- Endurance, no payload
- 17.4 min (11×4.5 basis)
- Reference Payload
- 410 g
In the box
- Q500 500 mm carbon-fiber airframe
- EMAX ECO II 3115 640 KV motors (4)
- HGLRC 60 A 4-in-1 BLHeli_S ESC
- Master Airscrew MR 10×4.5 propellers (4) with 6→5 mm adaptor rings
- MicoAir LR900-F telemetry pair (air + ground)
- MicoAir MTF-01P optical flow + laser rangefinder
- Hardware, wiring, standoffs and straps
You supply
- Autopilot — Pixhawk 6C, CUAV V5+ or Cube Orange+
- Companion computer — Jetson Orin Nano class; mounting provided, power is integrator-supplied
- 6S 5000 mAh LiPo with XT90 connector
- RC transmitter and receiver
- Mission payload — 1232 g of headroom to MTOW
- Ground station software — Mission Planner or QGroundControl